C.Scope MXL4-DBG Cable Detector

Accurate localization of cables and pipes

The XL4 series of cable detection equipment succeeds the well-known XL2 series. In addition to the introduction of innovative functions, the already widely appreciated features have been improved to detect even the most difficult-to-trace cables and pipes. And all this while operation has remained simple and minimal training is required. Completely new is the C.Scope MXL4-DBG multi-frequency cable detector with depth measurement, data logging, Bluetooth, and GPS. With data logging, search operations are stored in the internal memory for twelve months, allowing you to track which cable detector was used where, when, and in which search mode. Via the built-in Bluetooth function, the stored data can be transmitted wirelessly to a smartphone, tablet, or PC, and with the GPS function, a location is added to the measurements that can later be viewed via Google Earth or Google Maps. With the six different output frequencies, including the combined frequency – 33+131kHz, a wide variety of cables and pipes can be detected quickly and accurately by means of direct connection, via the simple induction method through the ground or via the winding method. With optimized Locator Sensitivity and Noise Rejection, the MXL4-DBG functions even at very high levels of background interference, allowing even the weakest signals to be detected (there is also a version without GPS and Bluetooth functionality: the MXL4-D). Thanks to the digital electronics, no annual calibration is required, resulting in cost savings and allowing the equipment to be used without interruption. The MXL4-DBG has an IP65 protection rating, can be used as a standalone unit or optionally in combination with the MXT4 Signal Generator, and comes with a warranty period of no less than three years!